SDI Radii-cal LED Curing Light
Light on weight, radically powerful The LED light that produces a super high depth of cure, but only weighs a little. High intensity The higher the intensity, the more the light penetrates to cure the underlying restorative, thus achieving a higher depth of cure. The Radii-cal has an extremely high intensity of 1200mW/cm2. Cure your restorative knowing you will have… Read more
Promotions
Description
Light on weight, radically powerful
The LED light that produces
a super high depth of cure,
but only weighs a little.
High intensity
The higher the intensity, the more
the light penetrates to cure the
underlying restorative, thus
achieving a higher depth of cure.
The Radii-cal has an extremely
high intensity of 1200mW/cm2.
Cure your restorative knowing
you will have maximum power.
Radii-cal’s ergonomic and lightweight
design minimizes fatigue and
maximizes comfort. The handpiece
The greater the depth of cure, the
more complete the curing of the
restoration. This ensures optimum
physical properties of the restorative
and increases the longevity of the
restoration. Feel confi dent knowing
you will achieve the highest depth
of cure.
Unlike many other LED lights,
the Radii-cal does not require a fan.
It uses heat sink technology to
reduce the amount of heat
emission. Furthermore, using a
combination of pulse technology
and steady current, the Radii-cal
can achieve a higher light output
without generating excess heat.
The light emitted by the Radii-cal
corresponds to the maximum
absorbance of camphorquinone
ensuring effi cient curing of
most light cured restoratives.
During the fi rst 5 seconds, the
Radii-cal’s light output power
gradually increases. This ‘soft-start’
polymerization minimizes stress
at the restoration-enamel/dentin
junction and reduces marginal
gaps in the restoration.
The Radii-cal is a cordless unit
allowing complete freedom of
movement and total control.
Save time and frustration with
the cordless Radii-cal.
The smooth gloss fi nish ensures no
bacteria can collect on the surface
making it fast and easy to clean.
Built in radiometer
The Radii-cal’s built in radiometer
provides a simple test to ensure the
functionality of the light.
The Radii-cal does not need to be
constantly recharged. A fully charged
Radii-cal allows you 1200 ten second
cures before you need to recharge
again.
The battery pack simply unscrews
from the Radii-cal unit and can be
replaced.
The Radii-cal’s robust and reliable
construction assures your purchase
is a long lasting investment.
Specifications
Technical Data
Handpiece (battery, control section and standard LED attachment)
– wavelength range: 440 nm – 480 nm
– peak wavelength range: 460 nm
– RAMP to full intensity: 5 seconds
– light intensity: 1200 mW/cm2 (peak)
– duration of continuous use 60 seconds
– total continuous run time
with fully charged battery: 3 hours, 20 minutes
– dimensions: 22mm diameter x 243mm long
– weight: 144g / 5.1 ounces
– battery: 2 x 4.2V Lithium Ion – 1200 mAh
Plug Pack
– input voltage: 90 – 264V – 50/60 Hz
– output voltage: 12V DC
– output current: 750 mA
– dimensions: 70mm high x 45mm wide x 50mm long
– weight: 80g / 2.82 ounces
Charger
– time to charge battery: 60 – 180 minutes
– operating temperature: 10ºC – 40ºC
– total height with handpiece inserted 255mm
– dimensions: 70mm wide x 40mm high x 130mm long
– weight 84g / 3 ounces
